Do-it-yourself Acrylic Frames | How to Make & Dangle Your 3D Art

Hunting for a way to jazz up your wall artwork? Attempt generating your very own Do-it-yourself acrylic frames for customized 3D artwork. This publish will walk you as a result of precisely how I made these in my home.

If you are on the lookout for a custom way to body your shots or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the great thing.

I landed on these frames since I wanted a small some thing to insert a minor more pizzazz to my bathroom wall.&nbsp

We decided to include my partner&rsquos like of golfing into the blend by printing shots he took of PGA golfing courses he&rsquos performed in black and white.

I like when art is a discussion piece, so this was the best addition to the rest room wall.

To make it really stand out, I manufactured these Do it yourself acrylic frames for each and every of the shots.

Listed here are the actions I took&hellip&nbsp


  • 1. Assemble your resources.

  • 2. Tape each aspect of each corner.

  • 3. you can try this out where you want to drill your holes.

  • 4. Drill your holes.

  • 5. Use your glue dots to secure your images to the frame.

  • six. Mark the complete on the wall exactly where you prepare to hold it.

  • 7. Use your punch software to mark the complete on the wall.

  • eight. Drill your holes in the wall.

  • 9. Screw the standoffs into the wall.

  • ten. Attach your body to the standoffs.

  • eleven. Revel in the completed product!

Disclaimer: This write-up does include affiliate inbound links for your comfort. This is at NO added value to you but earns me a modest commission. To examine far more, check out out our&nbspdisclosure policy.

1. Acquire YOUR Resources.

First items to start with, get all your elements. All sources for all the things I utilized are joined under. I also involved a checklist with hyperlinks of what we utilized to cling the frames, far too.&nbsp


  • Plexiglass/Acrylic Sheets

  • Standoffs

  • Glue Dots

  • Piece of Lined Paper

  • Drill&nbsp

  • Drill Bits&nbsp(a person for the dimensions of the opening of your standoffs and 1 for the screw for the wall)

  • Painter&rsquos Tape

  • Ruler

  • Marking Instrument (I used a Sharpie)


  • Pencil

  • Handheld Amount

  • Punch

  • Screwdriver

two. TAPE Every single Side OF Every single CORNER.

Plexiglass/acrylic is very sensitive.

For the reason that of this, you have to be quite very careful when you are drilling the holes.

Positioning a piece of painter&rsquos tape on either facet in which you program to drill your gap will aid hold the acrylic sheet from breaking or cracking when you drill.

I also retained the protective cover on every single aspect of the piece, far too.


Once you have put the painter&rsquos tape on all four sides (or nonetheless several places you approach to drill a hole), you can area a mark of exactly where you want to drill your hole.

I drilled my holes 1&Prime in from each individual edge as you can see from the image higher than.


Prior to truly drilling, double and triple look at that your marks are stage each horizontally and vertically.

You&rsquoll want to have these degree for when you cling them.&nbsp

The drill little bit you select ought to be significant more than enough to allow the standoff to fit in just the gap.

I would do a exam operate on a piece of scrap product to make confident it is big plenty of.&nbsp

At the time you are sure that the marking are level and the bit is large adequate, you want to commence drilling.

Here is a very good video clip to abide by if you would like a demonstration on&nbsphow to drill as a result of acrylic.

You want to use about fifty percent energy when you are drilling.

Sluggish and constant. If you go to quickly, the acrylic will crack, so just take your time.

As you drill you should see spirals of the acrylic little by little being eradicated.&nbsp

Repeat the drilling for every single hole you require.

five. USE YOUR GLUE DOTS TO Protected YOUR Pics TO THE Body.

After your holes are made, you can insert your image to the piece of acrylic/frame.

The vital listed here is to all over again, make positive your image is stage prior to you completely protected it to the body.

The glue dots are incredibly sticky and don&rsquot allow for a large amount of wiggle place, so it could be a superior notion to line up a piece of lined paper at the rear of the body to support you line the edges of your image.

Whatsoever trick performs for you to make absolutely sure the picture receives glued to the frame level will do.&nbsp

6. MARK THE Whole ON THE WALL Exactly where YOU Program TO Hang IT.

As you get started to cling, mark your holes on the wall, but make confident your body is level.

If you calculated correctly in the phase prior to drilling, the holes on your body must by now be level.

If you are hanging far more than one particular body like I did, make positive every single frame is amount in your grid, too.&nbsp


I adore this tool so substantially due to the fact it will get your hole commenced and allows your drill to keep in place when you start off drilling.

If you don&rsquot have one particular, I hugely recommend it!


Be absolutely sure to use a bit that matches the screws that arrived along with your standoffs.

This will most most likely be a scaled-down bit than the one particular you employed on the frames.

I also utilised a stud finder to see if I needed drywall anchors, but because these frames are not that significant, you could probably do without the need of them.


The moment you buy your standoffs, you&rsquoll see how they do the job.

In order for the photograph to &ldquostand off&rdquo the wall, you have to safe the standoff with the provided screw prior to attaching the picture to the standoffs.

As you can see from the picture, creating certain every little thing is stage and calculated effectively is tremendous vital.&nbsp


Once you&rsquove attached the standoffs, it&rsquos time to attach the images!

Line up the standoffs with your drilled holes and secure the standoffs.

If all goes well, every thing will line up properly and be ready to go!

If you are like my dad and I, you&rsquoll arrive throughout at least a person that doesn&rsquot line up perfectly.

For this, we cheated a tiny bit and secured the standoff to the frame and used a glue dot to protected it to the wall, so it didn&rsquot move.

We only experienced to do this for two corners of two frames, but don&rsquot fear if you mess up one&hellip We&rsquove been there!&nbsp

eleven. REVEL IN THE Completed Product!

Now it&rsquos time to delight in your function!

We did a grid of nine complete photos which was a significant endeavor with all the measuring, but I&rsquom in really like with how it turned out.

Allow me know in the reviews what you think of the concluded merchandise!

Salut! 👋
Ravi de vous retrouver.

Inscrivez-vous pour recevoir instantanément l'actualité national et international dans votre boîte de réception.

Nous ne spammons pas ! Consultez notre politique de confidentialité pour plus d’informations.

Articles similaires

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Bouton retour en haut de la page